Cinela

Suspension for Sennheiser MKH 8050 and 8040

Suspension for Sennheiser MKH 8060

Suspension voor DPA 2017

Z-SW-BASE, swivel base with XLR holder for use with Zephyx, Piano, and Albert windshields. Enables precise microphone po...

Z-SW-BASE, swivel base with XLR holder for use with Zephyx, Piano, and Albert windshields. Enables precise microphone positioning.

PIANO cable set for MS (upgrade)

XLRM/XLRF cable for COSI-S

[COSI-HLD-CMS50] Microphone holder for Sanken CMS-50 (Ø22.3 mm XLR5); plastic insert for placing the mic inside a COSI ...

[COSI-HLD-CMS50] Microphone holder for Sanken CMS-50 (Ø22.3 mm XLR5); plastic insert for placing the mic inside a COSI shell without windshield or isolation.

PIANISSIMO Short Pile Fur , Full grey

PIANISSIMO Short Pile Fur , Full black

MOD-E-OSIX-CMC-S – Suspension module for Schoeps CMC series without CUT60, configuration 6-A2-B2.

Full Fabric (Top/Bottom) for PIANISSIMO

PIANO cage (bottom) with bellows

Black/Grey fabric for PIANO Bottom part

PIANO for BP4029 with two axis' swivel

PIANO windshield for MKH418 2 axis swivel

Suspension set for MiniCMIT/CCM8

ZEPHYX windshield for MS Neumann KM184/120 (A)

COSI mike holder, KM140/150/184/185

[COSI-HLD-22a] Microphone holder for Ø21.8 mm (Neumann KM140/150/184/185); plastic insert for positioning the microphon...

[COSI-HLD-22a] Microphone holder for Ø21.8 mm (Neumann KM140/150/184/185); plastic insert for positioning the microphone inside a COSI structure.

[COSI-HLD-20-20] Microphone holder for Ø20 mm (20mm Front, 20mm Rear / Schoeps CMC1U); plastic insert for correct posit...

[COSI-HLD-20-20] Microphone holder for Ø20 mm (20mm Front, 20mm Rear / Schoeps CMC1U); plastic insert for correct positioning of the microphone in a COSI shell.

E-OSIX-SW-BASE – Large toothed swivel base for Cinela E-OSIX suspensions, offering precise positioning and stability.

E-OSIX for Schoeps CMIT 5 HARD(9-1-0-R). Suspension with elliptical isolators for effective handling noise reduction whe...

E-OSIX for Schoeps CMIT 5 HARD(9-1-0-R). Suspension with elliptical isolators for effective handling noise reduction when using the CMIT 5 microphone.

E-OSIX for DPA 4017B HARD(8-1-0-R). Suspension with elliptical isolators for effective isolation from handling noise and...

E-OSIX for DPA 4017B HARD(8-1-0-R). Suspension with elliptical isolators for effective isolation from handling noise and mic movement on boom or stand.

ALBERT windshield for CCM ORTF/XY/TRI