Accessories

MMP-B, preamp with fixed 50 Hz low-cut and switchable boost/roll-off filters. For DPA pencil capsules. XLR output, actively balanced.

MMP-C, ultra-compact preamp for DPA pencil capsules. Active impedance balancing and slightly softer character than other preamps in the series.

MMP-A, active preamp for modular pencil microphones. XLR output with 20 dB pad switch. Transparent, transformerless signal path.

[161115] Magnetic mount with a 3/8-inch thread for microphone clamps on magnetic metal surfaces. Diameter 22 mm, for use inside a piano or on a door frame.

MMP-ER, active cable preamp with XLR output and rear-entry for DPA pencil capsules. Supplied with 3m cable and compact 12mm housing.

MMP-ES, active cable preamp with XLR output and side-entry cable for DPA pencil capsules. Compact 12 mm body, fixed 3 m cable length.

[133105] CUT 60 / Active low-cut filter for Schoeps Colette, fitted between capsule and amplifier. Reduces low-frequency interference at 24 dB per octave.

[161406] TEF-S tabletop mounting adapter with shock mount for light table stands up to 250 mm, without B 1 D or B 5 D. Accepts components of 20 mm diameter.

[152202] AK SU/2U breakout cable from XLR5F to two XLR3M connectors. Splits a stereo microphone connection into two separate inputs on a recorder or mixer.

[152901] MKH cable sleeve for securing a 3 mm microphone cable with nylon string. For suspended microphones; fit before the connector is soldered in place.

[161409] XY stereo clamp for two CCM 4V/41V microphones or CMC 1 L amplifiers with MK 4V/41V capsules. For stand mounting or use with an optional MH 3/8 magnet.

[133005] KC 5 active Colette cable, 5 metres long, between an MK capsule and microphone amplifier. With 3 mm cable, impedance conversion and SGC swivel mount.

[161101] A2P CCM Polarflex mount for a Schoeps CCM 2, CCM 2H or CCM 2S together with a CCM 8. For processing both microphone signals with the Polarflex plug-in.

[165009] ST 20-3/8 ext long mounting cylinder for use with two AF 1 table flanges. With 3/8-inch thread and 20 mm diameter for support rods and goosenecks.

[133523] TM SRS 420 E38 420 mm table stand with two gooseneck sections and integrated microphone amplifier for MK capsules. With 3/8" mount and 5 m cable.

[133506] RC 700 KC 0,5 700 mm active Colette extension tube with adjustable capsule angle, 50 cm cable to the CMC amplifier and included RG 8 swivel mount.

[152401] AK DMS 3U adapter cable from XLR7F to three XLR3M connectors. Connects the three microphone signals from a Double MS array to separate recorder inputs.

[133508] RS 420 L5U 420 mm gooseneck for CCM-L microphones. With one flexible section, a Lemo connection and a 5-meter cable with XLR3M for table mounting.

[133002] GVC passive capsule swivel for Schoeps Colette, adjustable from 0° to 105°. Fits between an MK capsule and amplifier or an active Colette cable.

[152404] AK Surround M/5U breakout cable from an AES65 miniature multipin connector to five XLR3M connectors. Carries five separate surround microphone signals.

[133505] RC 700 700 mm active Colette extension tube with adjustable capsule angle, direct CMC amplifier connection and included RG 8 swivel mount.

GS-100 – suspension holder designed for the Sanken CO-100K. Reduces vibration and handling noise, providing stable support in studio and field use.

[123501] RL 1200 1200 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 mm diameter and a matte gray finish.

[133504] RC 350 KC 0,5 350 mm active Colette extension tube with adjustable capsule angle, 50 cm cable to the CMC amplifier and included RG 8 swivel mount.