Accessories

MMP-B, preamp with fixed 50 Hz low-cut and switchable boost/roll-off filters. For DPA pencil capsules. XLR output, actively balanced.

[133002] GVC passive capsule swivel for Schoeps Colette, adjustable from 0° to 105°. Fits between an MK capsule and amplifier or an active Colette cable.

[133005] KC 5 active Colette cable, 5 metres long, between an MK capsule and microphone amplifier. With 3 mm cable, impedance conversion and SGC swivel mount.

[MMP-F75] Modular active microphone preamplifier with 77 cm gooseneck for DPA MMC capsules; Active Drive, XLR output and 48 V phantom power

[MMP-F15] Modular active microphone preamplifier with 20 cm gooseneck for DPA MMC capsules; XLR output, 48 V phantom power and Active Drive

[152202] AK SU/2U breakout cable from XLR5F to two XLR3M connectors. Splits a stereo microphone connection into two separate inputs on a recorder or mixer.

[133523] TM SRS 420 E38 420 mm table stand with two gooseneck sections and integrated microphone amplifier for MK capsules. With 3/8" mount and 5 m cable.

MMP-C, ultra-compact preamp for DPA pencil capsules. Active impedance balancing and slightly softer character than other preamps in the series.

MMP-A, active preamp for modular pencil microphones. XLR output with 20 dB pad switch. Transparent, transformerless signal path.

Clamp Mount for 4099 Mic – Mounting clamp for DPA 4099 microphone, suitable for saxophones and brass instruments, easy to attach.

MMP-ER, active cable preamp with XLR output and rear-entry for DPA pencil capsules. Supplied with 3m cable and compact 12mm housing.

Universal Clip for 4099 Mic – Mounting clip with Velcro for DPA 4099 microphone, suitable for oboe, clarinet, bassoon, recorder, and flute.

[161101] A2P CCM Polarflex mount for a Schoeps CCM 2, CCM 2H or CCM 2S together with a CCM 8. For processing both microphone signals with the Polarflex plug-in.

MMP-ES, active cable preamp with XLR output and side-entry cable for DPA pencil capsules. Compact 12 mm body, fixed 3 m cable length.

[133105] CUT 60 / Active low-cut filter for Schoeps Colette, fitted between capsule and amplifier. Reduces low-frequency interference at 24 dB per octave.

[152404] AK Surround M/5U breakout cable from an AES65 miniature multipin connector to five XLR3M connectors. Carries five separate surround microphone signals.

[152403] AK Surround M/4U breakout cable from an AES65 miniature multipin connector to four XLR3M connectors. Carries four separate surround microphone signals.

[161115] Magnetic mount with a 3/8-inch thread for microphone clamps on magnetic metal surfaces. Diameter 22 mm, for use inside a piano or on a door frame.

[152401] AK DMS 3U adapter cable from XLR7F to three XLR3M connectors. Connects the three microphone signals from a Double MS array to separate recorder inputs.

[161406] TEF-S tabletop mounting adapter with shock mount for light table stands up to 250 mm, without B 1 D or B 5 D. Accepts components of 20 mm diameter.

[165009] ST 20-3/8 ext long mounting cylinder for use with two AF 1 table flanges. With 3/8-inch thread and 20 mm diameter for support rods and goosenecks.

[123506] TM S 250 LU 250 mm gooseneck for CCM-L or CMC 1 L with an MK capsule. Features a Lemo connection at the top and a direct XLR3M output at the bottom.

[152201] AK 2U/SU adapter cable from two XLR3F connectors to XLR5M. Routes two separate microphone signals through a single stereo cable without mixing them.

[MMP-F45] Modular active microphone preamplifier with 47 cm gooseneck for DPA MMC capsules; Active Drive, XLR output and 48 V phantom power