Collection

[COSI-HLD-20-20] Microphone holder for Ø20 mm (20mm Front, 20mm Rear / Schoeps CMC1U); plastic insert for correct posit...

[COSI-HLD-20-20] Microphone holder for Ø20 mm (20mm Front, 20mm Rear / Schoeps CMC1U); plastic insert for correct positioning of the microphone in a COSI shell.

IFBT4/E01-VHF frequency-agile VHF IFB transmitter with 239 frequencies (174.100–215.750 MHz); compatible with Lectroso...

IFBT4/E01-VHF frequency-agile VHF IFB transmitter with 239 frequencies (174.100–215.750 MHz); compatible with Lectrosonics IFB receivers; selectable audio roll-off.

Adapter for lavalier mics with 5-pin Switchcraft (TA5F). Converts 48V phantom to 5.6V electret. XLR output. Compatible w...

Adapter for lavalier mics with 5-pin Switchcraft (TA5F). Converts 48V phantom to 5.6V electret. XLR output. Compatible with Lectrosonics mics.

Adapter for lavalier mics with 3-pin Lemo. Converts 48V phantom to 5.6V electret. XLR output, balanced signal. Compatibl...

Adapter for lavalier mics with 3-pin Lemo. Converts 48V phantom to 5.6V electret. XLR output, balanced signal. Compatible with Sennheiser transmitters.

Lockit Synchronizer for video cameras and audio recorders

Form fitting shape wear for women with 3 built in pouches

[U-BACK-M-BLK] Back Strap Medium – Black Stretch strap 80–100 cm with vertical pouch for regular thickness transmitt...

[U-BACK-M-BLK] Back Strap Medium – Black Stretch strap 80–100 cm with vertical pouch for regular thickness transmitters; gripper stops slipping under clothes.

toupettape - hairpiece tape 50 strips, size 1 inch x 3 inch

BNC to BNC cable. Low loss 50 ohm Belden coax cable with quality connectors for wireless audio antenna. 2 m

Timecode cable. Angled BNC to 3.5mm angled jack, 3mm, 0.5m.

Power cable. Hirose 4 pin to Hirose 4 pin, 0.3meter, Hirose brand quality connector. Alternatively Hawk Woods LA-2

Sound Devices input cable. XLR 3 pin female to TA3, 0.5meter

XLR cable. XLR 5 pin female to 2x XLR 3 pin male, 5 mm, splitcable for MS, 0.5meter

XLR cable. XLR 3 pin female to XLR 3 pin male, 5mm, 0.5meter

UFM230 active UHF filter/amplifier module with 230 MHz passband (470–700 MHz), adjustable gain, powered via DC or coax...

UFM230 active UHF filter/amplifier module with 230 MHz passband (470–700 MHz), adjustable gain, powered via DC or coaxial bias.

LRBATELIM battery eliminator for LR receiver; replaces battery tray for external DC power; locking connector; includes m...

LRBATELIM battery eliminator for LR receiver; replaces battery tray for external DC power; locking connector; includes mounting screws.

HHVMC cardioid condenser capsule with VariMic™ equalizer for HH series handheld transmitters; adjustable tone control ...

HHVMC cardioid condenser capsule with VariMic™ equalizer for HH series handheld transmitters; adjustable tone control for low, mid, and high frequencies.

W 20 R1 [170111] windscreen with basket and cover for 20 mm capsules, reduces wind noise ~13 dB. Not for CCM.

[123511] STA 1400 L3U mic stand, 140 cm with gooseneck, internal XLR wiring and bottom XLR-3M connector.

[133517] Table stand with gooseneck and tube, 420 mm, between MK and CMC, 2x flexible.

SGCM [161109] metal microphone clamp for 8 mm tubes, 0°–100° swivel, fits CMC 1 L, CCM, KC, and CMR.

PSD 42 [153502] power supply for AES42 microphones with digital phantom power, includes AC adapter.

[133109] -20 dB attenuator

[169001] 40 mm sphere attachment for omni directional capsules.