Lectrosonics MTCR



PDR Firmware Update
- Professional quality digital audio recordings in Broadcast Wave Format
- Ultra compact size for easy concealment
- Records to micro SD cards (HC type)
- Wide range input gain adjustment for mic to line level signals
- Time code sync from external source
- Standard Lectrosonics TA5M input jack
- Lectrosonics "servo bias" input preamp
- Solid machined aluminum construction
- Over six hours of operation on a single AAA lithium battery
Specifications
- Storage media: Micro SD (HC type)
- File format: .wav (BWF)
- A/D converter: 24-bit
- Sampling rate: 48 kHz
- Recording modes/Bit rate:
- HD mono mode: 192 kHz
- Split gain mode: 384 kHz
- Type: Analog mic/line level compatible; "servo" bias preamp for 2V and 4V lavalier microphones
- Input level:
- Dynamic mic: 0.5 mV to 50 mV
- Electret mic: ?µA
- Line level: 17 mV to 1.7 V
- Input connector: TA5M 5-pin male
- Headphone/Line: Connector: 3.5mm miniJack; TRS
- Maximum level: -3 dBu (575mV RMS)
- Frequency response: 20Hz to 20kHz; +0.5/-1.5dB
- Signal to Noise ratio:
- HD mono mode: 105dB A-weighted
- Split gain mode: 80dB A-weighted
- Distortion: < 0.035%
- Connector: 5-pin Lemo
- Signal voltage: 0.5Vp-p to 5Vp-p
- Input impedance: 10kΩ
- Format: SMPTE 12M - 1999 compliant
- Power consumption: 300mW
- Battery type: AAA Lithium non-rechargeable (recommended)
- AAA Lithium: 6.5 hours typical
- AAA alkaline: 2 to 3 hours; varies with brand
- Celsius: -20 to 50°
- Dimensions: 60mm x 54mm x 17mm
- Weight: 71g (incl. Lithium batteries)
Recording
Input
Outputs
Audio Performance
TimeCode
Battery Power/Life
Operating temperature range
Dimensions & Weight
Product specifications
- Article number
- LecRecMTCR6615