Sennheiser MKH 8018

Sennheiser MKH 8018 [700252]

The MKH 8018 is a stereo shotgun RF condenser microphone with three switchable stereo modes (MS, XY-narrow, XY-wide). Its symmetrical push-pull transducer with a low-tension diaphragm delivers high sensitivity, low distortion and a wide frequency response. A switchable low-cut filter and a −10 dB pad provide additional control in varying conditions.

Main Features

• Three stereo modes: MS, XY-narrow, XY-wide for flexible imaging
• Push-pull transducer with low-tension diaphragm for high sensitivity and low distortion
• Switchable low-cut: −3 dB @ 70 Hz and switchable −10 dB pad
• Low self-noise; moisture-resistant, durable metal housing
• Fixed XLR-5M output; compact form factor for on-camera use

Specifications

• Pick-up pattern: stereo shotgun
• Frequency response: 40 Hz – 20 kHz
• Sensitivity (mV/Pa • dB re 1 V/Pa): M 56 • −25; S 25 • −32; XY-N 50 • −26; XY-W 32 • −30
• Equivalent noise level: (A-weighted) M 12 dB; S 14.5 dB; XY-N 12 dB; XY-W 13 dB; (CCIR) 24–25 dB
• Dynamic range: >126 dB; Max SPL: >126 dB
• Low-cut: −3 dB @ 70 Hz; Pad: −10 dB (switchable)
• Nominal impedance: 430 Ω; Min. load impedance: 4.7 kΩ
• Powering: P48 (IEC 61938), current consumption 2× 3.4 mA
• Connector: XLR-5M
• Dimensions: Ø 22 mm; length approx. 230 mm
• Operating temp.: −10 °C to 60 °C; Storage: −20 °C to 70 °C; RH 5–95% (non-condensing)

Included

• MKH 8018 microphone
• Microphone clamp MZQ 100
• Foam Windshield MZW 8018
• Threaded transport tube
• Adapter ring MZR 8000
• Safety instructions & Quick guide