Zephyx

Z-Cable-CCM-MS, dual Lemo to XLR5M cable for MS setup with two CCMs in Zephyx. Flexible near mics, reinforced at XLR, PC...

Z-Cable-CCM-MS, dual Lemo to XLR5M cable for MS setup with two CCMs in Zephyx. Flexible near mics, reinforced at XLR, PCB integrated in axis.

Suspension set for Schoeps CMXY

Suspension set for 4017C/CCM8

Suspension set for CCM Mono

Suspension set for Double MS CCM8 + 2 CCM4(V)

Z-SW-BASE, swivel base with XLR holder for use with Zephyx, Piano, and Albert windshields. Enables precise microphone po...

Z-SW-BASE, swivel base with XLR holder for use with Zephyx, Piano, and Albert windshields. Enables precise microphone positioning.

Z-Cable-XF, short XLR3 Male/Female cable for Zephyx with Sennheiser MKH 50. Flexible near mic, reinforced at XLR, PCB in...

Z-Cable-XF, short XLR3 Male/Female cable for Zephyx with Sennheiser MKH 50. Flexible near mic, reinforced at XLR, PCB integrated in central axis.

Z-Cable-X, short XLR3 Male/Female cable for Zephyx with OSIX 1 or 2. Flexible near mic, reinforced near XLR, PCB integra...

Z-Cable-X, short XLR3 Male/Female cable for Zephyx with OSIX 1 or 2. Flexible near mic, reinforced near XLR, PCB integrated in central axis.

Z-FUR-SP-B/G, short pile fur for Zephyx. Used with Z-COVER. Less attenuation than long pile, with minimal acoustic impac...

Z-FUR-SP-B/G, short pile fur for Zephyx. Used with Z-COVER. Less attenuation than long pile, with minimal acoustic impact.

Z-BELLOWS – Flexible seal between Z-AX and Z-CAGE for optimal wind protection and vibration isolation.

Z-CAGE – Main cage with cross structure and isolators, designed for the ZEPHYX windshield system.

Zephyx inner cross

Suspension set OSIX 2; CMC

Suspension set OSIX 1; KM100 and KM or KMA 184/185

Z-Cable-CCM, short XLR3 Male/Female cable for Zephyx with Schoeps CCM. Flexible near mic, reinforced at XLR, PCB integra...

Z-Cable-CCM, short XLR3 Male/Female cable for Zephyx with Schoeps CCM. Flexible near mic, reinforced at XLR, PCB integrated in central axis.

Zephyx Back cap

Suspension set OSIX 2; MKH50

Suspension set for MiniCMIT/CCM8

Z-FUR-LP-B/G, long pile fur for Zephyx. +4–5 dB attenuation from 20–200 Hz vs. short fur. Minor acoustic loss. U...

Z-FUR-LP-B/G, long pile fur for Zephyx. +4–5 dB attenuation from 20–200 Hz vs. short fur. Minor acoustic loss. Use only with Z-COVER.

Z-COVER, double-layer fabric cover for Zephyx. Black-grey polyester/polyamide. -1 dB @100 Hz, -2 dB @18 kHz. Hel...

Z-COVER, double-layer fabric cover for Zephyx. Black-grey polyester/polyamide. -1 dB @100 Hz, -2 dB @18 kHz. Helps with visual mic alignment.

Z-Cable-KM-MS, dual XLR3F to XLR5M cable for MS setup with two Neumann KMs in Zephyx. Flexible near mics, reinforced at ...

Z-Cable-KM-MS, dual XLR3F to XLR5M cable for MS setup with two Neumann KMs in Zephyx. Flexible near mics, reinforced at XLR, PCB integrated in axis.

Suspension set for MS Neumann KM184/120

Suspension set for 2 CMC, stereo MS

Z-KELLY, open-cell foam rain cover for Zephyx. Breathable and water-draining. Attaches quickly over Z-COVER or fur layer...

Z-KELLY, open-cell foam rain cover for Zephyx. Breathable and water-draining. Attaches quickly over Z-COVER or fur layer.