ShockMounts

Replacement Band (O-ring) for PSC shockmount (clear)

E-OSIX for DPA 4017C (10-0-00-R). Suspension with elliptical isolators for effective handling noise reduction when using the DPA 4017C with foam windscreen.

[161108] SGC miniature swivel microphone mount for 8 mm mounting sections. For Schoeps CMC 1 L, CCM, KC and CMR, adjustable up to 100 degrees either way.

KSUS Replacement polymer suspension for K-Tek KMT, KMTS, KGPS and KGPSS shock mounts. Holds the microphone in place and helps reduce vibrations during use.

KMT Microphone shock mount with an aluminum frame and four-point polymer suspension. With a 3/8"-16 connection for mounting on a boom pole or mic stand.

E-OSIX for Schoeps CMIT 5 SOFT(9-0-00-R). Suspension with elliptical isolators for effective handling noise reduction when using the CMIT 5 with foam windscreen

[MINIX CCM-UL] Compact microphone suspension for Schoeps CCM L and CMC 1 L. With Lemo connection, XLR output and adjustable swivel for boom pole use.

[MINIX 8000-UL] Compact microphone suspension for Sennheiser MKH 8040 and MKH 8050. With MZL connection and adjustable swivel for boom pole use.

Suspension for Schoeps CCM, XLR versie

Suspension for Sennheiser MKH20/40

Suspension for DPA 4017

Suspension for Sennheiser MKH60

KIT CCM-MS – 0.8 mm metal isolator for fixed mounting of CCM mics in M/S setups.

[RAD-00612] RAD Low Profile 3-Pin XLR Cable (275m)

[RAD-00377] RAD Mount Boom Adaptor with 360 XLR Holder

CXO4000 stereo microphone holder for DPA pencil microphones with MMP-ER/ES or MMP-GR/GS preamplifiers, suitable for XY and ORTF configurations.

E-OSIX for Schoeps CMC-1U HARD(10-1-00). Suspension with elliptical isolators for effective handling noise reduction when using the CMC 1 U with CUT 60.

A-MBOX [A80073] multicore breakout box with 6 TA3M inputs and 19-pin Binder 440 output. Designed for Ambient A-Ray system. Weight: 250 g.

[161001] A 20 elastic suspension for 20 mm microphones such as CMC 6. With adjustable angle, cable clamp and stand adapters. For low structure-borne noise.

KMTS Short microphone shock mount with an aluminum frame and four-point suspension. Two elastic KSUS suspenders spaced 2.8 cm apart support shorter microphones.

Suspension for Schoeps ORTF MSTC (XLR5 M/F)

Suspension voor Schoeps V microfoon

basic suspension for Neumann KM100

KIT A4/B4 – Isolator set for OSIX 3-60 and MKH 418, restoring vibration damping.