Sound Devices

XL-MCX to SMA [10713] 2-pack adapter cables (MCX to SMA, 57.6 cm) for connecting additional receivers to SL-2.

[28241] Upgrade kit for double battery life. In order to use the A20-BatteryDoubler the A20-Mini's door hinge needs to be upgraded to allow you to easily swap back and forth between the A20-BatteryDoubler and the standard battery door.

[10471] Hirose DC Input Sled for MixPre recorder series, same as Hawk Woods SD-1

AC-BALXLR-4 [9764] 54.6 cm adapter cable from 3-pin LEMO to XLR3F; reduces RF interference by ~40 dB; for balanced microphones.

Astral ARX2 - XLR [11491] dual digital diversity receiver, 1055 MHz tuning bandwidth with XLR/Hirose output adapter [8847]

Astral ARX2 - TA3 [11491] dual digital diversity receiver, 1055 MHz tuning bandwidth with TA3/Hirose output adapter [11710]

MX-PSU [7220] AC power adapter with USB-C for MixPre-3 and MixPre-6; delivers 5 V DC at 3 A; includes plugs for US, UK, Australia, and Europe.

[10469] L-Mount Battery Sled. Holds one L-Mount battery (not included). Powers MixPre Original Series, MixPre-M Series, and MixPre II Series recorders.

[10028] 64GB approved SD/SDHC card for use with Sound Devices and Video Devices products.

[28208] Wideband omnidirectional antenna (470–1600 MHz) for Astral ARX (A20-Nexus) receiver; includes mounting kit and cables.

XL-TC-USBC-BNC [11285] 20 cm timecode cable (BNC to USB-C) for connecting external timecode sources to A20-Mini, A20-TX, and A20-HH transmitters.

[25053] A20-2.4G ANT + Mount antenna and mounting kit for Astral ARX (A20-Nexus); optimizes NexLink control via front-mounted 2.4 GHz antenna.

[28238] Two 2.4 GHz SMA-M antennas for NexLink control with Astral ARX (A20-Nexus), to be connected to the rear panel’s SMA-F antenna ports.

XL-LCD-Protect [10066] Set of 4 clear Lexan protective covers for 8-Series recorders; shields LCD from scratches and splashes.

XL-Powerstation-8M [10807] 8-slot charging station for A20-Mini transmitters; supports simultaneous battery charging, file transfer, and timecode synchronization.

SAM-128SD [10449] 128GB SDXC card for 8-/6-Series and MixPre; up to 240 MB/s read, 100 MB/s write.

[9820] SL adapter to change the orientation of A10-RX

XL-TC-USBC-LEMO [11283] 15 cm timecode cable (5-pin LEMO to USB-C) for connecting external timecode sources to A20-Mini, A20-TX, and A20-HH transmitters.

[7170] 1 WM-Connect, 1 USB A-to-B right-angle adapter, 1 USB A-to-B cable adapter, 1 Quick Start Guide

AC-TCLEMO [9080] 40.6 cm timecode cable (5-pin LEMO to 3-pin LEMO) for connecting timecode sources to the A10-TX transmitter.

AC-TCBNC-IN [9072] Timecode cable (BNC to 3-pin LEMO) for connecting external timecode sources to the A10-TX transmitter.

A20-TX Belt Clip [11627] Sturdy metal clip for secure attachment of the A20-TX transmitter to belt or clothing.

[8928] Boom pole mount for A10TX

[29459] Bolt-action Switch for A20-TX