Collection

toupettape - hairpiece tape 50 strips, size 1 inch x 3 inch

BNC to BNC cable. Low loss 50 ohm Belden coax cable with quality connectors for wireless audio antenna. 2 m

Connected Electronics Waterproof Case Large [ IPXX 6 ]

SSMCVR silicone cover for Lectrosonics SSM transmitter; protects against moisture and dust; two-part design with cutouts...

SSMCVR silicone cover for Lectrosonics SSM transmitter; protects against moisture and dust; two-part design with cutouts for antenna, input jack, and LED.

26728-1 blue aluminum frame for Lectrosonics SRSNY adapter; connectors and mounting hardware not included.

SRSLEEVE mounting sleeve for SR series receivers; enables attachment to cameras, carts, or racks; includes Velcro.

Dual slot-in ENG receiver, wideband 76MHz tuning bandwidth

M2T/E01 with Dante Digital Duet IEM/IFB half-rack with Dante 4×4, four inputs, two stereo channels, RF 10/25/50 mW, 470...

M2T/E01 with Dante Digital Duet IEM/IFB half-rack with Dante 4×4, four inputs, two stereo channels, RF 10/25/50 mW, 470–614.375 MHz.

M2T/E01 Digital Duet IEM/IFB half-rack transmitter with two stereo channels, four analog inputs, RF 10/25/50 mW, 470–6...

M2T/E01 Digital Duet IEM/IFB half-rack transmitter with two stereo channels, four analog inputs, RF 10/25/50 mW, 470–614.375 MHz.

BEZELKITR1A replacement kit for Lectrosonics IFB R1A receiver; includes front bezel, frequency door, belt clip, bumper, ...

BEZELKITR1A replacement kit for Lectrosonics IFB R1A receiver; includes front bezel, frequency door, belt clip, bumper, and screws.

[170301] W 140 blue / Foam windscreen for Schoeps MiniCMIT and CMIT 5 microphones. Length 135 mm, for reducing wind nois...

[170301] W 140 blue / Foam windscreen for Schoeps MiniCMIT and CMIT 5 microphones. Length 135 mm, for reducing wind noise around the microphone in light wind.

TC 2 [165014] double miniature table stand for two CCM or KC microphones, with tilt adjustment and cable routing.

T 5 [165012] heavy table stand, 3/8" thread, 1.5 kg, 129 mm base, fits STR/RC sets and short tubes.

STR 250 [165006] 250 mm support rod, 3/8" threads, fits BF 250 and RC/RL tubes, 12 mm aluminium.

STR 1000 [165004] 1000 mm support rod, 3/8" threads, fits BF 250 and RC/RL tubes, 12 mm aluminium tube.

[161110] SGH stand clamp for Schoeps CMH 64 and CMH 641 handheld microphones. With tapered holder, 5/8"-27 stand thread ...

[161110] SGH stand clamp for Schoeps CMH 64 and CMH 641 handheld microphones. With tapered holder, 5/8"-27 stand thread and adapters for 3/8" and 1/2".

[161108] SGC miniature swivel microphone mount for 8 mm mounting sections. For Schoeps CMC 1 L, CCM, KC and CMR, adjusta...

[161108] SGC miniature swivel microphone mount for 8 mm mounting sections. For Schoeps CMC 1 L, CCM, KC and CMR, adjustable up to 100 degrees either way.

[161125] SG 20, v2026 / Microphone clamp for microphones with a diameter of 20 or 21 mm, including cable clip. Supplied ...

[161125] SG 20, v2026 / Microphone clamp for microphones with a diameter of 20 or 21 mm, including cable clip. Supplied in KMIT sets with CMC 1 U or CMD 42.

[133508] RS 420 L5U 420 mm gooseneck for CCM-L microphones. With one flexible section, a Lemo connection and a 5-meter c...

[133508] RS 420 L5U 420 mm gooseneck for CCM-L microphones. With one flexible section, a Lemo connection and a 5-meter cable with XLR3M for table mounting.

[123502] RL 350 350 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 ...

[123502] RL 350 350 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 mm diameter and a matte gray finish.

[149007] HSC 4VXP (Signature X) commentator headset with Ultrasone headphones and cardioid gooseneck microphone with str...

[149007] HSC 4VXP (Signature X) commentator headset with Ultrasone headphones and cardioid gooseneck microphone with strong bass roll-off. With B 5 and case.

[131103] MK 4V side-address cardioid Colette capsule with a mild high-frequency boost. For instrument and speech recordi...

[131103] MK 4V side-address cardioid Colette capsule with a mild high-frequency boost. For instrument and speech recording. Microphone amplifier not included.

[176201] ORTF-3D Outdoor Set for suspended eight-channel 3D ambience recording. With eight CCM microphones, heated winds...

[176201] ORTF-3D Outdoor Set for suspended eight-channel 3D ambience recording. With eight CCM microphones, heated windshield, cables, power supply and case.

[121105] CCM 8 L compact figure-8 microphone for MS, Double MS and Blumlein stereo. Includes detachable 5 meter XLR cabl...

[121105] CCM 8 L compact figure-8 microphone for MS, Double MS and Blumlein stereo. Includes detachable 5 meter XLR cable, SGC clamp and wooden storage case.