Power - Adapters

NP-SQN Adapter / 4 Switched Auxillary

[GLE-12W] Isolated 12W DC/DC converter and Ground Loop Eliminator, 9–18 V DC input to 12 V DC output, 1 A, 86% efficiency, Hirose 4-pin connectors.

[GLE-30W] Isolated 30W DC/DC converter and Ground Loop Eliminator, 9–18 V DC input to 12 V DC output, 2.5 A, 88% efficiency, Hirose 4-pin connectors.

BH20D-H dual battery holder with direct HRS4-4W outputs, D-TAP, and belt clip. Designed for use in ENG sound bags.

PC-11C – 3-pin Fischer to 4-way Power-Con splitter with built-in 12V voltage regulator, ideal for ARRI cameras.

NPA-TA4 – NP1 adapter with TA4 output for Sound Devices Scorpio, unregulated, 80 g.

NPD-TA4 – NP1 adapter with TA4 output and data communication for Sound Devices 833, 888, and Scorpio, unregulated, 68 g.

VLM-FX9-15 – Mini V-Lok adapter with 15mm rod clamp for Sony FX6/FX9 with 4x D-Tap (Power-Con), USB-A, and fixed 19.5V power cable.

VLM-FX9 – Mini V-Lok adapter for Sony FX9 with 2x D-Tap (Power-Con), USB-A, and fixed 19.5V power cable.

SD-1 – Hirose DC input sled for Sound Devices MixPre-3/6, supports 10–20 V input via 4-pin Hirose for external powering.

NPA-XLR – NP1 Power Adaptor with XLR 4-pin female connector, unregulated output via flying lead.

[GLE-60W] Isolated 60W DC/DC converter and Ground Loop Eliminator, 9–18 V DC input to 12 V DC output, 5 A, 90% efficiency, Hirose 4-pin connectors.

[GLE-20W] Isolated 20W DC/DC converter and Ground Loop Eliminator, 9–18 V DC input to 12 V DC output, 1.6 A, 87% efficiency, Hirose 4-pin connectors.

[ePSB-TA4F] USB-C PPS adapter converting USB-C power to TA4F. Provides 15 V or 17 V DC with PPS, with seamless switch to battery backup.

NPU-XLR4S – NP1 adapter with 4 switched Hirose outputs, voltage indicator and selectable 9.6V/12V output, weight 124 g.

LR-12A – Power-Con to Canon LP-E6 dummy battery cable, 8V regulated, 45 cm length.

[NP1PC] – Power adapter for NP1 batteries. Strong retention and available with Hirose 4p (straight/angled), XLR4 female or TA4 angled. Cable length 45 cm.

[SBCC-CAR] 12V vehicle power cable for Betso SB CHARGER with USB-C output, 9–18 V DC input, 5 A max current, 1.5 m cable; suited only for SB CHARGER.

eSmart BH2-D-T dual battery holder with direct TA4F outputs, D-TAP, and belt clip. Designed for use in ENG sound bags.

PD-SLED-UNT [no connector] battery sled for Rack-N-Bag. One-handed battery swap, ready for custom power connectors.

SD-4 – External MDV battery fitting with 30 cm cable, used with SD-1 Hirose sled on Sound Devices MixPre-3/6.

BP-MX2 – 2-channel BPU charger with 3A current per channel, compact and quiet operation due to ventilated casing.

BP-ATM4 – 4-channel BPU charger with semi-sequential charging, 16.8V output, and 60W XLR power, suitable for on-location use.

RP-M90 – 26V 90Wh Mini Reel-Power battery with V-Mount connection, fuel gauge, and Total Battery Protection.