Collection

BBI-LCT-120-S Lav Concealer Tape with 120 pre-cut, double-sided hypoallergenic pads in strips for mounting regular Lav C...

BBI-LCT-120-S Lav Concealer Tape with 120 pre-cut, double-sided hypoallergenic pads in strips for mounting regular Lav Concealers on skin or clothing.

[VFFLSQBK] Square black fur windscreen for lavaliers; low-profile high-density hair fur. Pack of 10 with 30 stickers for...

[VFFLSQBK] Square black fur windscreen for lavaliers; low-profile high-density hair fur. Pack of 10 with 30 stickers for discreet, effective wind-noise reduction.

4188 Headset Mic with Slim Directional Capsule and 4288 Headset Mic with Round Directional Capsule

HAMST Sticky Tape for lavalier microphones. 3 meters of skin-friendly, double-sided tape. Leaves no residue and is easy ...

HAMST Sticky Tape for lavalier microphones. 3 meters of skin-friendly, double-sided tape. Leaves no residue and is easy to cut to size.

D60TSS1 T-Shirt Holder for DPA 6060/6061 and MKE1. Beige holder for placement under T-shirt. Reusable and skin-friendly.

VBAGBPR Bag Big Purple – Purple Viviana pouch with 8 inner pockets and 1 external. Protective and foldable for lav gea...

VBAGBPR Bag Big Purple – Purple Viviana pouch with 8 inner pockets and 1 external. Protective and foldable for lav gear and tools.

eHRS4-HSW-4W passive hotswap cable for two eSMART batteries and BG-DU or BG-DU-REG. With Hirose output and telemetry fro...

eHRS4-HSW-4W passive hotswap cable for two eSMART batteries and BG-DU or BG-DU-REG. With Hirose output and telemetry from only one battery at a time during use.

[161407] TEF-M tabletop mounting adapter with shock mount for medium-heavy table stands up to 350 mm. Fits 20 mm compone...

[161407] TEF-M tabletop mounting adapter with shock mount for medium-heavy table stands up to 350 mm. Fits 20 mm components and reduces structure-borne noise.

Clamp Mount for 4099 Mic – Mounting clamp for DPA 4099 microphone, suitable for saxophones and brass instruments, easy...

Clamp Mount for 4099 Mic – Mounting clamp for DPA 4099 microphone, suitable for saxophones and brass instruments, easy to attach.

[138305] Mono-Set CMC 1 U, MK 8 compact figure-eight microphone set for M/S and Blumlein setups. With XLR output, SG 20 ...

[138305] Mono-Set CMC 1 U, MK 8 compact figure-eight microphone set for M/S and Blumlein setups. With XLR output, SG 20 and B 5 D in a wooden storage case.

[004421] SX PLUS SERIE COUPLING SET connecting brackets for SX-R4+, SX-AD8+ and SX-RC8+; brushed stainless steel, suppli...

[004421] SX PLUS SERIE COUPLING SET connecting brackets for SX-R4+, SX-AD8+ and SX-RC8+; brushed stainless steel, supplied as a pair with all mating screws.

M2TND/E01 digital IEM/IFB transmitter without Dante, with two stereo RF channels, four analogue XLR/TRS inputs, IR sync ...

M2TND/E01 digital IEM/IFB transmitter without Dante, with two stereo RF channels, four analogue XLR/TRS inputs, IR sync and control via Wireless Designer.

[123514] TSR 200 L gooseneck table stand for CCM-L or CMC 1 L with an MK capsule. Adjustable height and angle, with Lemo...

[123514] TSR 200 L gooseneck table stand for CCM-L or CMC 1 L with an MK capsule. Adjustable height and angle, with Lemo connections and a plastic carry case.

[161125] SG 20, v2026 / Microphone clamp for microphones with a diameter of 20 or 21 mm, including cable clip. Supplied ...

[161125] SG 20, v2026 / Microphone clamp for microphones with a diameter of 20 or 21 mm, including cable clip. Supplied in KMIT sets with CMC 1 U or CMD 42.

[123505] TM S 250 L38 250 mm gooseneck for CCM-L or CMC 1 L. With a 3/8-inch female mounting thread and an attached 5-me...

[123505] TM S 250 L38 250 mm gooseneck for CCM-L or CMC 1 L. With a 3/8-inch female mounting thread and an attached 5-metre cable terminating in XLR3M.

[123502] RL 350 350 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 ...

[123502] RL 350 350 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 mm diameter and a matte gray finish.

[161005] AMS 22 elastic suspension for two Colette microphones in an MS setup. Includes a swivel and thread adapters for...

[161005] AMS 22 elastic suspension for two Colette microphones in an MS setup. Includes a swivel and thread adapters for 3/8-inch and 1/2-inch stand mounting.

[131501] BLM 03 C miniature boundary layer capsule with a fixed 5 m cable for Colette microphone amplifiers. For tables,...

[131501] BLM 03 C miniature boundary layer capsule with a fixed 5 m cable for Colette microphone amplifiers. For tables, grand pianos and unobtrusive placement.

[191108] Surcharge Worship Microphones RAL9010 White – Surcharge for RAL9010 white finish for MK, CCM, CMC, CMIT (2*) ...

[191108] Surcharge Worship Microphones RAL9010 White – Surcharge for RAL9010 white finish for MK, CCM, CMC, CMIT (2*) and V4 models.

[024286] AMBEO 12-pin connector for SX-R4 Plus connects the Sennheiser AMBEO VR Mic directly, wired in parallel with the...

[024286] AMBEO 12-pin connector for SX-R4 Plus connects the Sennheiser AMBEO VR Mic directly, wired in parallel with the recorder’s four XLR microphone inputs.

SX-ST8D/8R-C compact modular analogue mixing console with eight input modules and an installed recorder module for mixin...

SX-ST8D/8R-C compact modular analogue mixing console with eight input modules and an installed recorder module for mixing and recording, with a mains PSU.

Explorer Budget Sound Cart with two shelves, Boom Holder, Spigot Riser Kit (for antenna etc.), 3U 19inch Rack Ears

eUSB-C-XLR4M power converter with 10–24 V DC XLR4M input, 45 W USB-C Power Delivery and 15 W USB-A Quick Charge 3.0 fo...

eUSB-C-XLR4M power converter with 10–24 V DC XLR4M input, 45 W USB-C Power Delivery and 15 W USB-A Quick Charge 3.0 for powering USB devices in the field.

eUSB-C-TA4M power converter with 10–24 V DC TA4M input, 45 W USB-C Power Delivery and 15 W USB-A Quick Charge 3.0 for ...

eUSB-C-TA4M power converter with 10–24 V DC TA4M input, 45 W USB-C Power Delivery and 15 W USB-A Quick Charge 3.0 for powering USB devices in the field.