Wireless
Microphones
Recorders
Boom Poles
Windscreens
Phones
Power
TimeCode
Cases
Sound Carts
Mixers
ShockMounts
MiscellaneousSX-R4+
Expand an SX-R4+ setup with products such as SX-AD8+, SX-RC8+, SX-LC8+ and SX-RX8+. This category also includes Minislot sets, interconnection cables, coupling brackets and digital or analogue option cards.
First establish the extra inputs, controls or connections you need. Then check required cables, firmware and adapter versions for each combination; receivers are not automatically included with a holder or mounting set.
[024352] SX-R4 Plus DANTE option board connects the SX-R4+ to Dante and AES67, with ASRC and Ethernet PoE power. Up to 16 recording channels with firmware 4.1.
[024351] SX-AD8 Plus DANTE option board sends eight digital audio channels to Dante and AES67, with ASRC, sample rates up to 192 kHz and Ethernet PoE power.
[024291] SX-AD8+ AVB option card: 8×24-bit out, AVB via RJ45 to Mac (OS X 10.9+), no proprietary software, 8-ch audio device, PoE powers SX-AD8+, 48/96/192 kHz.
[024281] 4CH OUT on XLR-5M option card for SX-R4+ with two balanced or four unbalanced analogue outputs, four AES3 channels and sample rates up to 192 kHz.
[044594] Minislot Set Combi for the Sonosax SX-RX8+, for selected Wisycom, Sennheiser, Sony, Shure and Audio Limited receivers with a suitable receiver adapter.
[044591] Minislot Set MCR42 for mounting a Wisycom MCR42 with a BPA42-IKSS adapter in the Sonosax SX-RX8+. The wireless receiver is supplied separately.
[002358] Cable R4+ to LC8+ and AD8+/RC8+ adapter cable with MDR26, Binder 8-pin and TA3F connectors, linking a Sonosax recorder to its controller and expansion.
[002352] Cable R4+ to LC8+ adapter cable for Sonosax SX-R4+ and SX-LC8+, with MDR26, Binder 8-pin and TA3F for connecting the controller and its AES microphone.
[002351] Cable R4+ to RC8+ or AD8+ or RX8+ connection cable for the Sonosax SX-R4+ and expansion modules, with MDR26 connectors for direct module connection.
[024286] AMBEO 12-pin connector for SX-R4 Plus connects the Sennheiser AMBEO VR Mic directly, wired in parallel with the recorder’s four XLR microphone inputs.
[044597] Minislot Set SRc for mounting a Lectrosonics SRc with an SRSUPER or SR-AES3 adapter in the Sonosax SX-RX8+. The receiver is supplied separately.
[004421] SX PLUS SERIE COUPLING SET connecting brackets for SX-R4+, SX-AD8+ and SX-RC8+; brushed stainless steel, supplied as a pair with all mating screws.
[044599] Minislot Set Blank cover panel with mounting screws for an unused wireless receiver position in the Sonosax SX-RX8+ dual Minislot receiver holder.
Overige categorieën in Recorders
SX-R4+
Expand an SX-R4+ setup with products such as SX-AD8+, SX-RC8+, SX-LC8+ and SX-RX8+. This category also includes Minislot sets, interconnection cables, coupling brackets and digital or analogue option cards.
First establish the extra inputs, controls or connections you need. Then check required cables, firmware and adapter versions for each combination; receivers are not automatically included with a holder or mounting set.
