Microphones - Accessories

[140104] MiniCMIT, anthracite-grey compact shotgun microphone for dialogue, with XLR, P12/P48 and fixed 70 Hz low-cut filter. Includes SG 20, W 140 and case.

EMP3.5S [A80137] Eumel adapter for electret microphones wired for Sony UWP-D, with a 3.5 mm TRS input and XLR3M output. Powered by 48 V phantom power.

MMP-ER, active cable preamp with XLR output and rear-entry for DPA pencil capsules. Supplied with 3m cable and compact 12mm housing.

MMP-ES, active cable preamp with XLR output and side-entry cable for DPA pencil capsules. Compact 12 mm body, fixed 3 m cable length.

[132301] CMC 1 SO microphone amplifier with gooseneck and Lemo output, wired for Sound Devices Astral TX and A20 transmitters. Compatible with all MK capsules.

[UB] Universal Lav Weight stainless steel weighted cable routing tool for lavaliers; guides microphone connector through clothing, fits Mini XLR, TA5, Lemo, MicroLock

MMP-A, active preamp for modular pencil microphones. XLR output with 20 dB pad switch. Transparent, transformerless signal path.

[161115] Magnetic mount with a 3/8-inch thread for microphone clamps on magnetic metal surfaces. Diameter 22 mm, for use inside a piano or on a door frame.

[133105] CUT 60 / Active low-cut filter for Schoeps Colette, fitted between capsule and amplifier. Reduces low-frequency interference at 24 dB per octave.

[161801] H 20 cable hanger for microphones with a 20/21 mm body. Suspends the microphone from its cable and allows horizontal and vertical angle adjustment.

[152202] AK SU/2U breakout cable from XLR5F to two XLR3M connectors. Splits a stereo microphone connection into two separate inputs on a recorder or mixer.

[132013] CMC 1 K compact Colette microphone amplifier with fixed 5 m XLR3M cable for Schoeps MK capsules. Includes SGC stand mount and wooden storage case.

[133509] TM S 250 C 250 mm gooseneck fitted between an MK capsule and a CMC microphone amplifier. Allows a Colette table microphone to be aimed at the speaker.

[UWB] – Universal Lav Wire Titanium cable gland for lavalier microphones. Compatible with all common connectors, easy to use and supplied with a zippered pouch.

[165009] ST 20-3/8 ext long mounting cylinder for use with two AF 1 table flanges. With 3/8-inch thread and 20 mm diameter for support rods and goosenecks.

[161125] SG 20, v2026 / Microphone clamp for microphones with a diameter of 20 or 21 mm, including cable clip. Supplied in KMIT sets with CMC 1 U or CMD 42.

[123506] TM S 250 LU 250 mm gooseneck for CCM-L or CMC 1 L with an MK capsule. Features a Lemo connection at the top and a direct XLR3M output at the bottom.

[123501] RL 1200 1200 mm extension tube for CCM-L and CMC 1 L, with Lemo connections and RG 8 swivel joint. Features an 8 mm diameter and a matte gray finish.

GS-100 – suspension holder designed for the Sanken CO-100K. Reduces vibration and handling noise, providing stable support in studio and field use.

[161406] TEF-S tabletop mounting adapter with shock mount for light table stands up to 250 mm, without B 1 D or B 5 D. Accepts components of 20 mm diameter.

[133005] KC 5 active Colette cable, 5 metres long, between an MK capsule and microphone amplifier. With 3 mm cable, impedance conversion and SGC swivel mount.

[152004] K 5 LU 5-metre adapter cable for Schoeps CCM-L microphones and CMC 1 L, from Lemo to XLR3M. With Neutrik EMC connector and included cable strap.

[161005] AMS 22 elastic suspension for two Colette microphones in an MS setup. Includes a swivel and thread adapters for 3/8-inch and 1/2-inch stand mounting.

[152404] AK Surround M/5U breakout cable from an AES65 miniature multipin connector to five XLR3M connectors. Carries five separate surround microphone signals.