Recorder Accessories

[9836] CL-16 fader controller with 16 faders, touchscreen, USB and GPIO; full control of 8-Series recorders with expansion port and user-programmable keys.

[10292] Optional accessory for the Scorpio, 888, and 833 that provides 8 channels of AES3 audio connectivity through four TA3F connectors.

Finger Control Surface 12 - Soft Fader Version

[044300] SX-AD8+ 8-channel microphone preamplifier and AES42 expander for SX-R4+; ultra low-noise mic inputs, AES42 support, gain control and digital output.

Finger Control Surface 12 - Firm Fader Version

[7086] Battery sled. Holds 2 Li-Ion L-mount batteries.

[044400] SX-RC8+ 8-fader remote controller for SX-R4+, SX62R and SX-R4+; 100 mm motorized faders, OLED displays, USB host/device and GPIO.

Finger Control Surface 8 - Firm Fader Version

[044550] Dual Minislot receivers holder for SX-R4+ with rotary fader extension, MiniSlot Set needed

Finger Control Surface 8 - Soft Fader Version

[10028] 64GB approved SD/SDHC card for use with Sound Devices and Video Devices products.

[044597] Minislot Set for Lectrosonics SRc with SRSUPER or SR-AES3

XL-LCD-Protect [10066] Set of 4 clear Lexan protective covers for 8-Series recorders; shields LCD from scratches and splashes.

XL-LCD6 [9078] Set of 4 clear Lexan protective covers for 6-Series recorders; shields LCD from scratches and splashes.

XL-LCD [3186] Set of 4 clear Lexan protective covers for 7-Series recorders; shields LCD from scratches and splashes.

[044500] SX-LC8+ 8-fader linear controller for SX-R4+ with 100 mm faders, function switches, REC/STOP transport and internal slate/com mic with AES output.

XL-MCX to SMA [10713] 2-pack adapter cables (MCX to SMA, 57.6 cm) for connecting additional receivers to SL-2.

SAM-128SD [10449] 128GB SDXC card for 8-/6-Series and MixPre; up to 240 MB/s read, 100 MB/s write.

[7170] 1 WM-Connect, 1 USB A-to-B right-angle adapter, 1 USB A-to-B cable adapter, 1 Quick Start Guide

[004421] SX PLUS SERIE COUPLING SET connecting brackets for SX-R4+, SX-AD8+ and SX-RC8+; brushed stainless steel, supplied as a pair with all mating screws.

[002358] Sonosax adapter cable for SX-R4+ to SX-LC8+ and SX-AD8+/SX-RC8+/SX-RX8+ with MDR26, Binder 8-pin and TA-3F; fixed lengths 20 cm and 140 cm.

[044591] Minislot Set for Wisycom MCR42 with BPA-IKKS42

[024351] Dante/AES67 option card for Sonosax SX-AD8+ with 8×24-bit audio to network, ASRC clocking, sample rates up to 192 kHz and PoE power.

[10469] L-Mount Battery Sled. Holds one L-Mount battery (not included). Powers MixPre Original Series, MixPre-M Series, and MixPre II Series recorders.