Recorder Accessories

Finger Control Surface 12 - Soft Fader Version

[044300] 8 Microphone/Line Preamplifier with AES outputs

[044591] Minislot Set for Wisycom MCR42 with BPA-IKKS42

[9836] CL-16 fader controller with 16 faders, touchscreen, USB and GPIO; full control of 8-Series recorders with expansi...

[9836] CL-16 fader controller with 16 faders, touchscreen, USB and GPIO; full control of 8-Series recorders with expansion port and user-programmable keys.

[10292] Optional accessory for the Scorpio, 888, and 833 that provides 8 channels of AES3 audio connectivity through fou...

[10292] Optional accessory for the Scorpio, 888, and 833 that provides 8 channels of AES3 audio connectivity through four TA3F connectors.

[044400] Fader Extension Module with 4x AES in, for SX-R4+

Finger Control Surface 12 - Firm Fader Version

[10471] Hirose DC Input Sled for MixPre recorder series, same as Hawk Woods SD-1

[044500] Linear Fader Control for SX-R4+, without cable

XL-LCD-Protect [10066] Set of 4 clear Lexan protective covers for 8-Series recorders; shields LCD from scratches and spl...

XL-LCD-Protect [10066] Set of 4 clear Lexan protective covers for 8-Series recorders; shields LCD from scratches and splashes.

[7170] 1 WM-Connect, 1 USB A-to-B right-angle adapter, 1 USB A-to-B cable adapter, 1 Quick Start Guide

XL-MCX to SMA [10713] 2-pack adapter cables (MCX to SMA, 57.6 cm) for connecting additional receivers to SL-2.

Finger Control Surface 8 - Soft Fader Version

[7087] USB-C to 2x USB-A Y-cable for powering from a computer. For MixPre recorders.

[7086] Battery sled. Holds 2 Li-Ion L-mount batteries.

[024281] 4-output option module on XLR-5 connector for SX-R4+

[044550] Dual Minislot receivers holder for SX-R4+ with rotary fader extension, MiniSlot Set needed

XL-ANT2.4 [10065] Bluetooth antenna for 8-Series mixer-recorders; enables wireless control via Android and iOS.

SAM-128SD [10449] 128GB SDXC card for 8-/6-Series and MixPre; up to 240 MB/s read, 100 MB/s write.

[04421] metal clips #2 to connect RC8+ or AD8+ to the SX-R4+

[02358] Cable for coupling SX-R4+ to LC8+ and AD8+/DC8+

[024351] Dante option module for SX-AD8+

[024352] Dante option module for SX-R4+

[10469] L-Mount Battery Sled. Holds one L-Mount battery (not included). Powers MixPre Original Series, MixPre-M Series, ...

[10469] L-Mount Battery Sled. Holds one L-Mount battery (not included). Powers MixPre Original Series, MixPre-M Series, and MixPre II Series recorders.