Schoeps CMC 1 K, LemoSD

Schoeps CMC 1 K, LemoSD [132016]

The Schoeps CMC 1 K, LemoSD is a compact Colette microphone amplifier with a fixed 0.5-meter cable and a 3-pin Lemo connector for Sound Devices. Combined with a separately available MK capsule, it forms a complete analog microphone.

Main Features

• Compatible with Schoeps MK capsules and active Colette accessories.
• Fixed connecting cable with Lemo connector for Sound Devices.
• SCHOEPS RFI Shield for protection against radio-frequency interference.
• Operates on P12 or P48 phantom power.
• Fixed low-cut filter: 20 Hz, 12 dB/octave.

Compatibility and Connection

This version has the Lemo connection for Sound Devices, with the A10 specifically listed by Schoeps. The connected transmitter must supply suitable P12 or P48 phantom power. Check both the connection and the powering capabilities of the transmitter model being used.

Specifications

• Amplifier frequency range: 20 Hz–20 kHz.
• Output: 3-pin Lemo for Sound Devices, analog, one channel.
• Cable length: 0.5 m, tolerance ±5%.
• Maximum output voltage: 1.8 V into a 1 kΩ load.
• Maximum SPL with MK 4: 135 dB SPL at P48; 131 dB SPL at P12, with less than 0.5% distortion.
• Output impedance: 50 Ω.
• Minimum recommended load: 1 kΩ.
• Powering: P48, 30–52 V; P12, 11–13 V.
• Current consumption: 2 mA at P48; 3 mA at P12.
• Amplifier length: 29 mm; diameter: 20 mm.
• Weight: approximately 28 g without cable.
• Finish: matte gray.

Other Versions

• CMC 1 K, XLR [132013]: fixed 5 m cable with XLR3M connector.
• CMC 1 K, LemoZaxcom [132017]: fixed 0.5 m cable with 3-pin Lemo connector for compatible Zaxcom transmitters supplying P12 or P48 phantom power.

Included

• 1 × Schoeps CMC 1 K with fixed 0.5 m cable and 3-pin Lemo connector for Sound Devices.
• 1 × SGC [161108] miniature stand mount with swivel.
• 1 × wooden storage case.

MK capsule and transmitter are available separately. Polar pattern and sensitivity depend on the selected capsule.